In March 2021 Rayglass’s refit team started on one of the biggest projects they’ve ever taken on - transforming 26 Protector RIBs from America’s Cup support boats to fully custom Coastguard NZ rescue vessels. In mid December they reached the halfway mark, having completed three out of six batches. 

Now they’re sending the latest batch off to Wanaka, Queenstown, Marlborough and Dunedin to help Coastguard save lives at sea. We caught up with refit manager Tim Tsomas to find out what the job has been like so far. 

300 hours later

Each and every Coastguard NZ vessel is packed with custom fitted equipment and search and rescue technology. Tim says fitting all of this is time consuming work:

“Every boat requires between 220 to 300 hours of labour. I’d say we definitely spent over 1,000 hours on this batch”

“There are billions of bits and pieces that go into it and while the fitouts may be standard no two boats are the same. It’s been a great learning curve - we’ll get there in the end.”

The four vessels in the current batch includes three nine metre Protectors and a 12.5 metre boat for Dunedin Coastguard. The lists of features in these vessels are incredibly long:

“The circuit breaker panel has no fuses and takes around 40 hours just to wire. There’s a folding radar arch on every roof, including radar sonar,” Tim said. “This can fold fully flat if the vessels need to go under a bridge.”

Search and rescue technology

Every vessel also includes a number of lights to illuminate the water during search and rescue missions. That includes a spotlight that can be controlled with a joystick and rotated 360 degrees and a floodlight for wider illumination. 

Tim says one vessel has a particularly special set up:

“Dunedin has a big night vision, infrared camera fitted. It’s a good asset to have when you’re searching around the shoreline at night.”

Every boat has a 12v window demister, which has already proven handy for those chilly South Island mornings. There’s also a water pump on the transom that can put fires out by spraying water, or suck water out of sinking boats to re-float them. 

Further forward there’s a powerful loudspeaker that you can control through your Simrad VHF. Up in the cabin there’s suspension seats and cabinets full of search and rescue gear, from stretchers to first aid equipment and fire extinguishers. 

Three batches down, three to go

Despite all the work they’ve already done, Tim and his team are only half way done and have another three batches left to complete. Despite the mountain of work in front of him Tim doesn’t seem to mind:

“It certainly is a big job and can be a bit of an emotional rollercoaster. But we’re all into it and it’s such an exciting project to be a part of,” Tim said.

“My guys are amazing as well, they just get on with it and get the job done. They’re hard grafters which makes my job a lot easier.”

After a hectic year of long hours and short weekends Tim and the team are winding down (slightly) before enjoying a well-earned break. Despite all the hard work he sounds like he’s over the moon with the results:

“The boats are a credit to the guys on the crew. The end results are incredible - the way they're laid out for the end user - intuitive and itemised. At the end of the day they’re a great product for a good cause.”

Latest from the LOGBOOK

See the first vessel in NZ featuring twin V10 outboards
December 21, 2023

See the first vessel in NZ featuring twin V10 outboards

Graysea was the first vessel in NZ to be fitted with twin Mercury Verado V10 engines. Tour the boat and find out more about these incredible engine...

We built the ultimate dive tender for a 56m superyacht
December 05, 2023

We built the ultimate dive tender for a 56m superyacht

Read the story of the custom build required to craft a high performing dive tender for our of the southern hemisphere's most luxurious superyachts. 

Meet Mahi: The Rayglass team’s most memorable Protector refit
October 03, 2022

Meet Mahi: The Rayglass team’s most memorable Protector refit

Mahi is an old 5.5m Protector that needed a lot of love. Hear the story of her restoration and find out why this was one of the Rayglass team’s fav...